ULTRAMAX-Advanced Process Management

 

 

Bibliography

Adelman, A., and W.F. Stevens (1972).  "Process Improvement by the 'Complex' Method," AIChE Journal, Vol. 18, No. 1, p. 20.

Bhateja, C.P. and C.W. Moreno, (1989) "Practical Optimization of Production Grinding Systems", SME Modern Grinding Technology Clinic, October 10,12, 1989; Detroit, Michigan

Box, G.E.P., and N.R. Draper (1969). Evolutionary Operations, John Wiley & Sons, New York, New York.

Box, G.E.P., and N.R. Draper (1987). Empirical Model Building and Response Surfaces, John Wiley & Sons, New York, New York.

Box, M.J. (1965). "A New Method of Constrained Optimization and a Comparison With Other Methods," Computer Journal, Vol. 6, p. 42.

Boyle, R.J., Patterson, P.D., Pech, J. (1995). “TVA Exceeds CAAA NOx Requirements.”  Power Engineering, August, 1995 issue.

Boyle, R.J., Pech, J. and Patterson, P.D. (1995), "Reducing NOx While Maintaining Boiler Performance at TVA's Johnsonville Steam Plant Using Sequential Optimization", International Joint Power Generation Conference, Minneapolis, Minnesota, October 9-11, 1995.

Catusús-Serviá, J.J., Smoak, R.A., Squires, R.T., et al., "A Test for an Optimization Method Applied to Controlling NOx Emissions in a PC-Fired Boiler." ISA, POWID/EPRI Controls and Instrumentation Conference, Phoenix, AZ,  June 7-9, 1993.

Colosimo, B.M., del Castillo, E. (2007). “Bayesian Process Monitoring, Control and Optimization” Chapman & Hall / CRC. ©2007; Boca Raton, Florida, USA. Dec 2006.  See C. W. Moreno (2006) below.

Crichton, J.R., “Ashland Chemical Adopts Control Optimization System.”  CONTROL, November, 1989.

Dharmarajan, N.N., and Patterson, P.D. “Boiler Tuning with SPO: Critical First Step in NOx Compliance Strategy of Central & South West Corporation.”  AWMA Conference and Expo, Nashville, TN, June 1996.

Draper, N., and H. Smith (1966). Applied Regression Analysis, John Wiley & Sons, New York, New York.

Eakle, D.L., E.P. Payson, and C.A. Jarc (1997).  “An On-line Advisory System Using Dynamic Optimization Enables Allegheny Power to Improve Boiler Efficiency, Reduce LOI and Control NOx”, International Joint Power Generation Conference and Exposition, Denver, CO (November 1997).

Higazy, M.A. and R.L. Haman (1996), “Boiler Tuning Using SPO at Detroit Edison”, EPRI Workshop/NOx Controls for Utility Boilers, Cincinnati, OH August, 1996.

Howard,J.W. (1997). “The Effect of Dynamic Modeling and Optimization Technology on SNCR Performance”, Conference on Selective Catalytic and Non-Catalytic Reduction for NOx Control, Pittsburg, PA

Hurwitz, Arnon M. (1993) "Sequential Process Optimization with a Commercial Package", Arizona State University; 6th National Symposium: Statistics and Design in Automated Manufacturing, Phoenix, AZ, February 1993.

Krueger, M.S. and Patterson, P.D. (1997) “Optimization Saves Money, Reduces NOx” Power Engineering, Vol 101, No. 09, September 1997, pp21.

Krueger, M.S., and Patterson, P.D., “Illinois Power’s Operator Advisory System to Reduce Heat Rate and Control NOx Based on Sequential Optimization.”  Power-Gen Americas ‘95, Anaheim, CA, December, 1995

Krueger, M.S., Stopek, D.J., and Patterson, P.D. (1996), “Continuous Combustion Optimization to Improve Boiler Efficiency and Control NOx at Illinois Power’s Hennepin Station”, Heat Rate Improvement Conference, Baltimore, September 21-23, 1998.

Krueger, M.S., Stopek, D.J., Yunker, S.B. and Patterson, P.D., “Illinois Power’s Operator Advisory System To Reduce Heat and Control NOx Based On Sequential Optimization”, American Power Conference, Chicago, Illinois, April 9-11, 1996.

Krueger, M.S.; Stopek, J.J.; Yunker, S.B.; and Patterson, P.D. “Illinois Power’s Operator Advisory System to Reduce Heat Rate and Control NOx Based on Sequential Optimization.”  Power-Gen Americas ‘95, Anaheim, CA, December 1995

Lang, R and Jarc, C.A. (1998) “Using Closed-loop Dynamic Optimization to Improve Boiler Efficiency at Chemopretrol’s Litvinov Plant”, Int’l Joint Power Generation Conference, Baltimore, Maryland, Aug 24, 1998.

Lipták, Béla G. and Eren, Halit (2011) “Instrument Engineers' Handbook: Process Software and Digital Networks”, Vol #3, Edition #4, CRC Press, 19 August 2011.  Chapter 4.5 “Operations Optimization with Sequential Empirical Optimization”.

McVay, M. and Patterson, P.D. (1998) “Illinois Power’s On-Line Dynamic Optimization of Cyclone Boilers for Efficiency and Emissions Improvement”, Int’l Joint Power Generation Conference, Baltimore, Maryland, Aug 24, 1998.

Mahalanobis P.C. (1936). “On the generalized distance in statistics”, Proceedings of Natural Sciences, India 2:49–55.

Montgomery, D.C. 1984. Design And Analysis of Experiments. New York: John Wiley & Sons.

McCafferty, R.H.; Patterson, P.D. (2000) “Sequential Optimizer Offers Different Approach for NOx Control”, Power Engineering, PennWell Corporation, Tulsa, October 2000. 

Moreno, C.W, Yunker, S.B.; “Reducing NOx Emissions and Improving Boiler Efficiency Using Synthetic Intelligence”, Conference on Expert System Applications for the Electric Power Industry, Phoenix, AZ, December 8-10, 1993.

Moreno, C.W. & Yunker, S.B. (1992) "ULTRAMAX: Continuous Process Improvement through Sequential Optimization", EPRI.

Moreno, C.W. (1979). "A Performance Approach to Attribute Sampling and Multiple Action Decisions," AIIE Transactions, September, pp. 183-97. (another example of sequential decision analysis`)

Moreno, C.W. (1984) "Gaining Control of Plastics Forming Machines with new Technology for On-Line Adjustments", 1994 Structural Plastics Conference, Washington, DC, April 10-13, 1994

Moreno, C.W. (1984-1987) "ULTRAMAX User's Guide", Ultramax Corporation, Cincinnati, Ohio, USA.

Moreno, C.W. (1986). "Self-Learning Optimizing Control Software", Instrument Society of America, Robotics and Expert Systems Conference (Robexs'86), Houston, Texas, June 1986, pp. 371-377.

Moreno, C.W. (1988). "Statistical Process Optimization," P-Q Systems Annual Conference, Dayton, Ohio, 1987, pp. 1-14.

Moreno, C.W. (1993) "How Modern 'Smarter Not Harder' Technologies can Simultaneously Maximize The Combination of Pollution Reduction and Business Success", Conference on Environmental Commerce, CONEC'93, Chattanooga, TN, October 17-20, 1993.

Moreno, C.W. (1993) "Improving Process Performance: Which is Better, Sequential Process Optimization or DOE?", Conference on Industrial Statistics and Quality Improvements, Oakland University, Rochester, MI, August 20-22, 1993.

Moreno, C.W. (1995-2009) The Blue Book: “Maximizing Profits through Production.  The ULTRAMAX Method: Concepts and Procedures” Ultramax Corporation, Cincinnati, Ohio, USA.

Moreno, C.W. (1999) “Improvements Through Process Adjustments”, American Statistical Association Quality and Productivity Research Conference, May 19-21 1999, Schenectady, New York, USA.

Moreno, C.W. (2001) “Dynamic Optimization of Production Operations”, IIE Annual Conference 2001, Dallas, Texas, USA, May 20-23

Moreno, C.W. (2001) “Comparison of two well known Methods for Optimizing Power Plant Operations”, 44th Annual ISA Power Industry Div. Conference, Orlando, Florida, USA July 7-13, 2001

Moreno, C.W. (2006) “Software: A gentler step-up”, InTech, ISA (Instrumentation, Systems and Automation) Society, April 2006, pp. 45; www.isa.org/InTechTemplate.cfm?Section=Article_Index1&template=/ContentManagement/ContentDisplay.cfm&ContentID=53257

Moreno, C.W. (2006) “Optimization in Production Operations: Optimal “Lean Operations” in Manufacturing”, IIE Lean Division web publication, October 24, 2006.  http://www.iienet2.org/uploadedFiles/IIE/Community/Technical_Societies_and_Divisions/Lean/Lean_details_pages/OptimizationinProductionOperations.pdf  

Moreno, C.W. (2007) “An Application of Bayesian Statistics to Sequential Empirical Optimization” Chap. 11, page 291, of “Bayesian Process Monitoring, Control and Optimization” by Colosimo and del Castillo – see above. 

Moreno, C.W. (2009) “Fast Analytical Technology for the Optimisation of Operations in Power Plant Boilers and Auxiliaries”, Tech Pro Conference, Hyderabad, December 17-18, 2009 on "Thermal Plant and Equipments PADO (Performance Analysis, Diagnosis & Optimisation) Systems”.

Moreno, C.W. (2010,2011) Chapter 4.5 “Operations Optimization with Sequential Empirical Optimization  contribution to Lipták and Eren (2011) “Instrument Engineers' Handbook: Process Software and Digital Networks”, Vol #3, Edition #4, CRC Press, August 2011.

Moreno, C.W. and Redlinger, S.E. (1993), "Applications of Sequential Optimization in Injection and Blow Molding Operations", 3rd. International, Conference on Advances in Polymer Processing, Cincinnati, Ohio, March 29-31, 1993

Moreno, C.W. and Yunker, S. B. (1992), “ULTRAMAX: Continuous Process Improvement Through Sequential Optimization”, EPRI, Palo Alto, Calif., 1992.

Moreno, C.W. and Yunker, S.B. (1993), "Reducing NOx Emissions and Improving Boiler Efficiency Using Synthetic Intelligence”, Conference on Expert System Applications for the Electric Power Industry, Phoenix, Arizona, December 8-10, 1993.

Nachtsheim, C. J. (1987). "Tools for Computer-Aided Design of Experiments", Journal of Quality Technology, Vol. 19, No. 3, July 1987, pp. 132-160.

O’Rourke, B., and Howard, J.W. “Sequential Process Optimization for Reducing VOC Emissions.”  Chemputers IV Conference and Expo, Houston, TX, March 1996.

Patterson, P.D. (2000). “Optimizing Boilers For NOx Control And Fuel Savings: Three Utility Examples Using Sequential Process Optimization, Flame??  About April 2000

Patterson, P.D. and Yunker, S.B.  (1995), "Simultaneous Reduction of LOI and NOx while Maintaining Boiler Performance Using Sequential Optimization”, U.S. Department of Energy Unburned Carbonaceous Material on Utility Fly Ash Conference, Pittsburgh, Pennsylvania, March 1995.

Press, S.J. (1972). Applied Multivariate Analysis, Holt, Rinehart & Winston, Chicago, Illinois.

Redlinger, S.E. (1988). "The ULTRAMAX Method and Practical Applications", P-Q-Systems Annual Conference, Dayton, Ohio, June 15-17, 1988, pp. 2-24.

Redlinger, S.E. (1990).  "Application of the ULTRAMAX Program in Decision Making and Optimization", R's Company Innovation Solutions Publication, Cincinnati, Ohio.

Redlinger, S.E. and C.W. Moreno (1993), "Applications of Sequential Optimization in Injection and Blow Molding Operations", 3rd. International, Conference on Advances in Polymer Processing, Cincinnati, Ohio, March 29-31, 1993

Sachs, E.M., R. Guo, S. Ha, and A. Hu, (1990), "On-line process optimization and control using [run-by-run] sequential design of experiments", 1990 Symposium on VLSI Technology Rec., Honolulu, HI, June.

Sachs, E.M., R. Guo, S. Ha, and A. Hu, (1991), "Process Control System for VLSI Fabrication", IEEE Transactions on Semiconductor Manufacturing, Vol. 4, No. 2, May 1991 Abstract

Schott, J. “NOx and Heat Rate Reduction on a Gas-fired Boiler Using ULTRAMAX”.  Workshop on NOx Controls for Utility Boilers, Cincinnati, OH, August 1996.

Schott, J., M. Prince and C. Jarc, “NOx and Heat Rate Reduction on Gas-Fired Boiler using ULTRAMAX”, EPRI Workshop/NOx Controls for Utility Boilers, Cincinnati, OH (1996).

Spendley, W., et al. (1962). "Sequential Applications of SIMPLEX Designs in Optimization and EVOP," Technometrics, Vol. 4, pp. 441-61.

Stallings, J., Petril, E.M., “EPRI APECS Tools for Optimization of NOx Emissions and Performance in Fossil Power Plants.” AWMA Conference and Expo, Nashville, TN, June, 1996.

Stuckmeyer, K.  and R. J. Boyle (1996), “Optimization of Cyclone Boiler for NOx Control.” EPRI Workshop/NOx Controls for Utility Boilers, Cincinnati, OH

Teetz, R., and Patterson, P.D., "Reducing NOx While Maintaining Boiler Performance Using Constrained Sequential Optimization." EPRI Fuel Oil Utilization and Management Workshop, Clearwater Beach, FL, 1994.

Wald, A. (1947). Sequential Analysis, John Wiley & Sons, New York, New York.

Walters, F.H. et al. (1991). Sequential SIMPLEX Optimization, CRS Press, Inc., Boca Raton, Florida.